Seeing Housing Using UOAM?
Posted: Fri Aug 27, 2010 4:17 pm
How do people set up their uoam to see houses through out the shard?
Turn on house logging under the UOA tab.
It's enabled by default (should be) in our UOAM package.
UO Second Age
A forum for discussion of Second Age UO Shard
http://forums.uosecondage.com/
Seeing Housing Using UOAM?
Page 1 of 1
Re: Seeing Housing Using UOAM?
Posted: Fri Aug 27, 2010 7:36 pm
Re: Seeing Housing Using UOAM?
Posted: Fri Aug 27, 2010 8:11 pm
oh so this is a uosa thing? not a uoam thing? for example does it work on other shards?
Re: Seeing Housing Using UOAM?
Posted: Fri Aug 27, 2010 8:18 pm
Its all UOAM. The UOSecondAge's client installer (which includes UOAM) has it on by default now (apparently).
Re: Seeing Housing Using UOAM?
Posted: Fri Aug 27, 2010 10:44 pm
right, UOAM does the actual house logging stuff, works on any shard where razor is being used.. i was only pointing out that it should be on by default in our installer if you used it, or want to get it. especially since now our very own unofficial version 9 of UOAM is multi-client capable (see my sig).
the UOAM v8 is updated moreso than the one in the installer also, our sourceforge page will always be updated more frequently than the main site also
the UOAM v8 is updated moreso than the one in the installer also, our sourceforge page will always be updated more frequently than the main site also
Re: Seeing Housing Using UOAM?
Posted: Tue Oct 05, 2010 7:48 am
I still can't see housing on mine 
Re: Seeing Housing Using UOAM?
Posted: Tue Oct 05, 2010 8:20 am
On the UOAssist tab under Additional Settings on UOAM, make sure you check "Show Objects that would appear on UO's Radar Map" and "Send Notifications to game window". Enter a file name, such as Houses, in the box for "Log Houses to this file".
Start 1 client only of UO, and then start up UOAM. It should then record and keep all the housing info that you pass by. The houses just don't appear, you need to actually log them into the file by running near them so they show on your radar.
I had problems with it at first but it seems it was from running more than one client with it, or logging in and out of several clients leaving only 1 still running with UOAM, and it wouldn't record and save the info correctly then.
Start 1 client only of UO, and then start up UOAM. It should then record and keep all the housing info that you pass by. The houses just don't appear, you need to actually log them into the file by running near them so they show on your radar.
I had problems with it at first but it seems it was from running more than one client with it, or logging in and out of several clients leaving only 1 still running with UOAM, and it wouldn't record and save the info correctly then.
Re: Seeing Housing Using UOAM?
Posted: Mon Oct 18, 2010 3:59 am
If you are using Windows 7 try running both Razor and UOAM in Windows XP compatability mode. This worked for me.
Re: Seeing Housing Using UOAM?
Posted: Tue Oct 26, 2010 6:27 pm
The latest version has it enabled by default. Download it here:
http://www.uosecondage.com/Downloads
http://www.uosecondage.com/Downloads
Re: Seeing Housing Using UOAM?
Posted: Wed Oct 27, 2010 12:34 pm
UOAM will not just automagically show all the houses. You have to run around the whole world and be close enough (sometimes even step in the stairs) for the House to showup on UOAM.
Also it will not update these locations until you run around again.. and again...and again...
Also it will not update these locations until you run around again.. and again...and again...