Carpentry Help!
Carpentry Help!
Any guide?
The thing right now is .. It's raising horribly slow.33.2 to 33.7 i used something like .. hmmm 1500 log?Doing hundred of wooden Box and Crates .
It's raising so slow and it's just 33 ish.I don't even want to think about 90's.I am doing something wrong or it's just a pain in the ass skill to raise?
Opposite side .. my tinkering,Mining raise smoothly and it's much higher.
The thing right now is .. It's raising horribly slow.33.2 to 33.7 i used something like .. hmmm 1500 log?Doing hundred of wooden Box and Crates .
It's raising so slow and it's just 33 ish.I don't even want to think about 90's.I am doing something wrong or it's just a pain in the ass skill to raise?
Opposite side .. my tinkering,Mining raise smoothly and it's much higher.
- MatronDeWinter
- UOSA Donor!!
- Posts: 7249
- Joined: Wed Mar 04, 2009 3:35 am
- Location: 你的錢包
Re: Carpentry Help!
Make small red boxes and medium crates for a bit until you reach about 48.0 shown.
Then start making Ballot box deeds until about 55, followed by wooden shields until 68.
Then get 40 tailoring and start making fishing poles until 74.
Then make Quarterstaves until 80.0
and finally Gnarled staves all the way to GM (this is the longest part)
When you get to the last 2.0 or so, make a few armoires every now and then to keep things random, but not too many, they waste alot of wood.
Then start making Ballot box deeds until about 55, followed by wooden shields until 68.
Then get 40 tailoring and start making fishing poles until 74.
Then make Quarterstaves until 80.0
and finally Gnarled staves all the way to GM (this is the longest part)
When you get to the last 2.0 or so, make a few armoires every now and then to keep things random, but not too many, they waste alot of wood.
Re: Carpentry Help!
Shown real skill or with the bonus? With the Bonus it's something like 49 ..I have read another guilde and it's told me making trinsic chair.Actually after 400 log i gained .8. Which seem to raise much faster.I was simply not gaining with small crate.MatronDeWinter wrote:Make small red boxes and medium crates for a bit until you reach about 48.0 shown.
Then start making Ballot box deeds until about 55, followed by wooden shields until 68.
Then get 40 tailoring and start making fishing poles until 74.
Then make Quarterstaves until 80.0
and finally Gnarled staves all the way to GM (this is the longest part)
When you get to the last 2.0 or so, make a few armoires every now and then to keep things random, but not too many, they waste alot of wood.
i guess it's was my mistake.I though the only thing that mattered was shown real but look like it's not?
Hey matron i know you have a tinkerer.My tinkering now at 82 .. Does trap start to be good at 80? I'm going to try it on myself
I'm pondering the question.What i'm gonna do with the 584850398503 lockpick i have haha.
- MatronDeWinter
- UOSA Donor!!
- Posts: 7249
- Joined: Wed Mar 04, 2009 3:35 am
- Location: 你的錢包
Re: Carpentry Help!
go by your shown skill.
Tinker traps are usless before gm.
Tinker traps are usless before gm.
Re: Carpentry Help!
estimated # of boards used?
- MatronDeWinter
- UOSA Donor!!
- Posts: 7249
- Joined: Wed Mar 04, 2009 3:35 am
- Location: 你的錢包
Re: Carpentry Help!
I think somewhere along the lines of 40-50k. But I went from 0-GM, so it's probably a bit less.Daolin wrote:estimated # of boards used?
Re: Carpentry Help!
I used this method for 50-100. It took 62,000 boards.MatronDeWinter wrote:Make small red boxes and medium crates for a bit until you reach about 48.0 shown.
Then start making Ballot box deeds until about 55, followed by wooden shields until 68.
Then get 40 tailoring and start making fishing poles until 74.
Then make Quarterstaves until 80.0
and finally Gnarled staves all the way to GM (this is the longest part)
When you get to the last 2.0 or so, make a few armoires every now and then to keep things random, but not too many, they waste alot of wood.
-
- Posts: 333
- Joined: Sun Mar 15, 2009 2:40 am
Re: Carpentry Help!
and seriously, i think macroing inside a house really makes a difference, it took forever for me when i was just restocking from bank, that's from personal experience
Re: Carpentry Help!
I'm also GMing Carpentry and I sold all my wooden shields to the BS vendors. Now i'm starting with the fishing poles.
Is there a vendor that buys this poles from me? And if so, where?
Thanks for the help!
Is there a vendor that buys this poles from me? And if so, where?
Thanks for the help!
Re: Carpentry Help!
Have you tried fishermen at the docks?
Re: Carpentry Help!
This is spot on but I have made 1 slight adjustment, instead of armoires do large yew tables, they take same skill as armoires but use 20% less boards.MatronDeWinter wrote:Make small red boxes and medium crates for a bit until you reach about 48.0 shown.
Then start making Ballot box deeds until about 55, followed by wooden shields until 68.
Then get 40 tailoring and start making fishing poles until 74.
Then make Quarterstaves until 80.0
and finally Gnarled staves all the way to GM (this is the longest part)
When you get to the last 2.0 or so, make a few armoires every now and then to keep things random, but not too many, they waste alot of wood.
?
Re: Carpentry Help!
Don't make anything but gnarled staves.
There's no such code here that checks for "mixing things up". That didn't come into UO until the "anti-macro code" publish, which was after this shard's time span.
Carpentry is one of the more tedious skills to GM, in terms of the number of items you need to make, new macros, obtaining boards, etc.
There's no such code here that checks for "mixing things up". That didn't come into UO until the "anti-macro code" publish, which was after this shard's time span.
Carpentry is one of the more tedious skills to GM, in terms of the number of items you need to make, new macros, obtaining boards, etc.
Re: Carpentry Help!
No im aware of that, thats not the reason Matron suggested it, its just because it takes around 6.0 more in skill points, so if you are stuck, throwing the odd table/armoire in will give you a better chance to gain, not because of the mixing up of items, just because its a higher skill item. Same with smithing, if your not seeing any gains at 98-GM it does not hurt to throw in the odd plate arms, just to see if you can budge it.
?
Re: Carpentry Help!
I havent tested it here, but does the overloading bug work here? I used it on OSI when I did carpentry there for the convenience of sticking 50k boards in my pack.
Re: Carpentry Help!
NVM, my bad. Figured it out.....from 47-74 skill = 31,300 boards roughly so far. Will update total numbers when finished.
Update: Up to 87.1 shown skill and just passed the 40k boards mark.....
New Update: 96.5 skill and 60k boards used.....will update final # used once I reach GM.
99 - 70k boards.......I am begtining to hate carpentry.
GM Finally! Total boards used: 75k
Followed guide to a T and id gnarled staves from 80 to GM with no alternating to other items.
Update: Up to 87.1 shown skill and just passed the 40k boards mark.....
New Update: 96.5 skill and 60k boards used.....will update final # used once I reach GM.
99 - 70k boards.......I am begtining to hate carpentry.
GM Finally! Total boards used: 75k
Followed guide to a T and id gnarled staves from 80 to GM with no alternating to other items.